This Timber Tuff Steel Handle Timber Jack is a reliable tool that you can count on. Lifts logs so chainsaw won't dig into ground; 2-part steel handle for small storage spaces; Overall length 48 in.; usable handle length 37 in. Handles logs up to 12 in. diameter; Lifts logs 11 in. off ground; Bottom lift can be removed for rolling logs. This versatile tool makes logging tasks easier with a cant hook function and a timberjack tool. Specifications. Super Log Jack. Timberjack tool. 37 in. wooden handle. Use with logs up to 14 in. in diameter. Lifts logs 11 in. from the ground. Slip pin removes the jack for cant hook work. Red powder coated finish. Felled Steel Timberjack – 48in Timber Jack Tool, Cant Hook Log Roller Tool with Log Hook for Felling and Logging. Right Hand Timberjack Triple Thick Log Lifter That Never Bends, Heavy-Duty Log Jack Helps You Lift, Move & Chainsaw Timber, Lumber & Wood, Grip Handle, Thick Heavy Steel Body, Adjustable Hook. History. Timberjack was founded in Woodstock, Ontario in the s by Wesley Maggill and Robert Simons, who designed an articulated four-wheel drive tractor with a winch at the back. They produced a prototype and production took off from there. Timber Tuff's Timber Jack is constructed of a wood handle for superior strength and also has a strong, powder-coat finish to resist corrosion and last longer. This 2-in-1 tool can also help you roll logs easily by simply removing the bottom lift of the jack.

This tool check it out on Amazon supports big logs, is mostly two times less expensive than the Woodchuck Tools timberjack, has a long handle, and has an additional feature of being turned into a cant hook.

Is it worth saving some money getting this log jack? In my opinion no, as it think the Woodchuck is still better, but as always, you are free to disagree.

First, i should point out that the handle of this log lifter is made from wood. It can as well be turned into a cant hook if you need be, as the stand is easily removable by bolts.

The supported log diameter is around inches; as always, you should be able to grab a little smaller or even larger logs than defined.

You can expect this log lifter to be mostly about two times cheaper than the Woodchuck Tools one. As pointed out in the feature section, the handle is made from wood.

In my opinion it is a major problem, especially for a timberjack — you will be putting it through a lot of stress, meaning you can break the handle easier than if it would be from aluminum or fiberglass.

The supported tree diameters are small — that might be enough for you, but in my opinion, having a log jack which supports bigger dimensions in a higher range is more important.

I guess you have already noticed that this log jack along with the second one on this list is from the same company. These tools even look alike — the only real difference is their length and accepted log diameter.

Once again, this one too has a synthetic, more specifically, fiberglass handle which also has a steel rod inside of it, for extra reinforcement.

Just like the first Roughneck log lifter on this list, it also has two hooks instead of one, which should grab and hold onto logs you want to buck better.

The A-frame stand which is used to elevate logs off the ground can once again be removed even here, turning the tool into a cant hook.

It weighs 17 pounds — that is a whole 7 pounds lighter than the first timberjack of this company i showcase on this list, which is probably because this tool is 12 inches shorter.

And just like many other log jacks on this list except the wooden one , it also has a rubber grip, which is always a welcoming addition. It can only handle logs up to 16 inches in diameter, which is not the 20 inch maximum some other alternatives have.

Just like many of the tools on this list, this one also has some weight to it. The tool affiliate link is almost exactly the same as the first one from this company, just shorter, and because of it lighter.

The log lifter, just like all of them from Roughneck, has the same fiberglass handle with some steel in it for extra toughness.

Has one hook, as opposed to two the other ones from this company had. Having just one hook will still do the trick, just that obviously having extra may make the thing work better.

The maximum supported tree size is 12 inches, which is second smallest from the Ironton, and the smallest one from the three of the same company.

As with many of the ones on this list, you can also remove the log jacking frame on this too and turn the log lifter into a cant hook, with the removal of some bolts.

The gripping part of the handle is also padded with rubber, so it would be more comfortable to use. Again, the product weighs not too little.

Log diameter range is also very small. That might be enough for your needs, but having a tool which can be used on larger logs in bigger range is always better.

This log jack supports smaller diameter logs, has a long handle, but even then weighs quite a bit. As i said before, if you will be only bucking small trees, then this just might be enough for you.

You can get this log lifter on Amazon. I am going to be blunt here. I think you have already noticed that in my opinion, the best choice is the Woodchuck Tools one.

But why? What makes this tool be better than anything else? First of all, it supports the largest diameter and range of logs, and still somehow manages to be at least 7 pounds lighter than even the second lightest tool on this list.

The reason why there is such a big gap in weight is because the tool is made from aluminum. The biggest reason why i think this jack is the best on the market is because of its supported log diameter and range.

It can raise the largest logs up to 20 inches in diameter, and it can also do the same on logs as little as 6 inches. If you will use the log lifter in muddy conditions, or think that the legs of it will dig into the ground, try placing a piece of wood or even a sheet of metal underneath the feet, so it will have less of a chance to do so.

I love firewood — i burn it, stack it and process it. This is a site where i share all of my wood-related experiences, one post at a time. In , the color was changed to green with black and yellow trim.

John Deere purchased Timberjack and continued the green, black and yellow paint scheme. Timberjack was owned by the Eaton Corporation in the s, s and early s.

In Timberjack made a leveraged buyout from Eaton to become an independent company. After a short period carrying the double-name FMG-Timberjack, in Timberjack became the brandname for the group.

As of June, , at the forestry fair "Florence Wood", the Timberjack product line was discontinued, and John Deere, its parent company, became the largest single brand of forestry equipment.

Its global market share for both cut-to-length and full tree equipment was very strong shortly after the acquisition.

Media related to Timberjack vehicles at Wikimedia Commons. From Wikipedia, the free encyclopedia. For other uses, see Timberjack disambiguation.

This article does not cite any sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.

Forestry tools and equipment.